Cash Flow & Working Capital

The Cash Conversion Cycle by Industry: What “Normal” Actually Looks Like

November 20, 2026• 11 min read• MidBank — Your Financial Advocate
The Cash Conversion Cycle by Industry: What “Normal” Actually Looks Like — The Ledger by MidBank

The cash conversion cycle (CCC) measures how many days pass between paying cash out for inventory and labor and collecting cash in from a customer. There is no single “normal” number — it runs from well under a month for software and quick-turn retail to well over four months for healthcare, and KPMG’s 2025 tracking of 2,700+ U.S. public companies found the smallest companies carry a cash conversion cycle of about 120 days versus 65 days for the largest, nearly double. The number that matters is not a benchmark table — it is whether your own cycle is getting longer or shorter, and why.

Ask five business owners how long it takes their business to turn a dollar spent into a dollar collected, and four of them will not have an answer — not because the number does not matter, but because nobody ever asked them to calculate it. The cash conversion cycle is that number. It is one of the few metrics that tells you, in a single figure, exactly how much of your own cash is tied up financing your customers and your inventory before you ever see it again.

What the cash conversion cycle actually measures

The formula has three parts, each one already a number your bookkeeping can produce:

The cycle itself is DSO + DIO − DPO. A contractor who collects in 45 days, holds materials for 20 days, and pays suppliers in 30 days runs a 35-day cycle: for 35 days at a time, the business is funding its own operations out of pocket before a customer's payment arrives to refund it. A business with a negative cycle — collecting from customers before it has to pay suppliers — is effectively financed by other people's money, which is the position grocery and quick-service retail chains sit in.

What "normal" looks like by company size

There is no single industry-wide normal, but the most current, traceable benchmark comes from KPMG's 2025 tracking of more than 2,700 U.S. public companies from 2020 through 2024. The overall median cash conversion cycle rose from 83 days in 2020 to 90 days in 2023 before easing slightly to 89 days in 2024 — and broken out by company size, the pattern is consistent every year of the study: smaller companies run a materially longer cycle than large ones.

Cash conversion cycle by company revenue size, 2024

Cash conversion cycle (days sales outstanding + days inventory outstanding − days payable outstanding), by revenue band, 2024.

Small (under $300M revenue)Small (under $300M revenue): 120 days120 daysMedium ($300M–$3.0B revenue)Medium ($300M–$3.0B revenue): 100 days100 daysLarge (over $3.0B revenue)Large (over $3.0B revenue): 65 days65 days

These bands are publicly traded companies, not privately held small businesses — KPMG’s tracked universe skews larger than a typical owner-operated business. Read the gap directionally: the smallest companies in this study ran a cash conversion cycle nearly twice as long as the largest ones, every year from 2020 to 2024.

View the data as a table
Cash conversion cycle
Small (under $300M revenue)120 days
Medium ($300M–$3.0B revenue)100 days
Large (over $3.0B revenue)65 days
Source: KPMG — Working Capital Trends in the US Market (2025), 2,700+ US public companies, 2020–2024

The gap is not small. Companies under $300 million in revenue ran a 120-day cash conversion cycle in 2024, versus 100 days for the $300 million–$3.0 billion band and 65 days for companies over $3.0 billion. KPMG's universe is public companies, so the smallest band here is still larger than most privately held small businesses — treat the absolute days as a large-company floor, not a small-business number, and read the direction of the gap as the real finding: less negotiating leverage with suppliers, less bargaining power on payment terms with customers, and tighter margin for error all push smaller businesses toward a longer cycle, not a shorter one.

A cash conversion cycle does not ask whether your business is profitable. It asks how long you have to fund the gap before your own profit shows up as cash.

What "normal" looks like by sector

Company size explains part of the spread; the sector you operate in explains the rest. KPMG's 2024 sector medians show how wide that range runs even among large, well-capitalized public companies:

Median cash conversion cycle by sector, 2024

Median days of cash tied up in receivables and inventory, net of payment terms extended by suppliers, for US public companies by sector, 2024.

HealthcareHealthcare: 146 days146 daysInformation technologyInformation technology: 118 days118 daysIndustrialsIndustrials: 102 days102 days

Healthcare runs longest because insurer reimbursement cycles are slow and inventory (drugs, supplies, devices) sits on shelves; industrials carry heavy physical inventory; information technology runs shorter because software and services carry little or no inventory to finance.

View the data as a table
Median CCC
Healthcare146 days
Information technology118 days
Industrials102 days
Source: KPMG — Working Capital Trends in the US Market (2025)

The driver behind each number is physical and structural, not accidental. Healthcare's 146-day median reflects slow insurer reimbursement on the receivables side and inventory — drugs, devices, supplies — that has to be stocked ahead of use. Industrials carry heavy work-in-process and finished-goods inventory. Information technology's shorter 118-day median comes from selling software and services that carry little or no inventory to finance in the first place. A business modeling its own cycle against "the industry average" needs the actual sector, not a generic small-business number — a healthcare services company and a software company have almost nothing in common on this metric even if their revenue is identical.

Calculating your own number

You do not need specialized software to compute this — a trailing-twelve-month income statement and balance sheet are enough:

  1. DSO = (Accounts Receivable ÷ Total Credit Sales) × 365
  2. DIO = (Average Inventory ÷ Cost of Goods Sold) × 365
  3. DPO = (Accounts Payable ÷ Cost of Goods Sold) × 365
  4. CCC = DSO + DIO − DPO

Run it quarterly, not once. A single snapshot tells you where you stand; a trend line tells you whether a slow-paying customer, a supplier who tightened your terms, or a bloated inventory position is quietly stretching the cycle — the same early-warning logic behind a rolling 13-week cash forecast, just measured from a different angle.

Why the cycle matters more than the P&L some months

A business can be profitable on paper and still be financing a 90-day cash conversion cycle out of a thin bank balance — which is exactly the trap covered in Profitable and Broke. Growth makes the problem worse before it makes it better: a business that doubles sales while holding the same CCC needs roughly double the working capital tied up in receivables and inventory at any one time, which is why rapid growth is one of the more common reasons a profitable business ends up needing a line of credit it did not expect to need.

Work through the arithmetic on a concrete example. A contractor doing $600,000 a year in revenue with a 60-day cash conversion cycle has, on average, about $98,600 of cash permanently tied up in the gap between paying for materials and labor and collecting from the customer ($600,000 ÷ 365 × 60). That is not lost money — it comes back — but it is money the business cannot spend on payroll, new equipment, or a slow month while it is tied up in the cycle. If that same contractor wins a new contract and revenue jumps to $900,000 while the 60-day cycle stays the same, the cash permanently parked in the cycle rises to roughly $147,900 — an extra $49,300 the business needs to fund from somewhere, even though the growth itself is unambiguously good news. Lenders who finance growth almost always ask for a cash flow projection for exactly this reason: growing revenue on an unchanged cycle is a financing need, not a free lunch.

The same arithmetic runs in reverse when the cycle shortens. Shaving ten days off a 60-day cycle on that same $600,000 contractor frees up roughly $16,400 in cash that was previously tied up doing nothing — cash that did not come from a loan, a new customer, or a price increase. It came entirely from collecting ten days faster, paying suppliers ten days later, or turning inventory ten days quicker. That is the practical reason the cash conversion cycle is worth tracking even for a business with no immediate plans to borrow: every day shaved off the cycle is a day's worth of working capital returned to the business, permanently, at zero cost.

The three levers, and which one to pull first

For most small businesses, DSO is the fastest lever to pull because it is entirely within your control — unlike DIO, which depends on demand forecasting, or DPO, which depends on a supplier saying yes. Fix collections first, then work the other two.

If your cash conversion cycle has been drifting longer and you are financing the gap with a revolving balance that never quite clears, that is worth a direct conversation before it becomes an emergency one. Schedule a consultation and we will look at where your cycle is actually stretching.

Questions business owners actually ask

What is a good cash conversion cycle?

There is no universal “good” number — it depends entirely on your industry and business model. A negative cycle (collecting from customers before paying suppliers) is the strongest position and is common in grocery and quick-service retail. Among the public companies KPMG tracked in 2024, the overall median was 89 days, information technology ran shorter at a 118-day sector median, and healthcare ran far longer at 146 days — so “good” means shorter than your own prior quarter and shorter than your direct competitors, not a fixed day count.

Why do smaller companies tend to have a longer cash conversion cycle than larger ones?

KPMG's 2025 tracking of 2,700+ U.S. public companies found a consistent pattern from 2020 to 2024: companies under $300 million in revenue ran a 120-day median cash conversion cycle versus 65 days for companies over $3.0 billion. Smaller companies generally have less leverage to negotiate longer payment terms from suppliers and less leverage to demand faster payment from customers, both of which push the cycle longer.

Is the cash conversion cycle the same thing as a cash flow forecast?

No. The cash conversion cycle is a single ratio describing how long cash is tied up in your operating cycle on average. A 13-week cash flow forecast is a week-by-week projection of actual dollars in and out. They measure related but different things — the CCC tells you whether your structural cycle is getting longer or shorter; the forecast tells you whether you can make payroll in week six.

Can a business have a negative cash conversion cycle, and is that good?

Yes — it means a business collects cash from customers before it has to pay its own suppliers, effectively financed by supplier terms rather than its own capital. It is generally a strong position, common in businesses with fast inventory turns and favorable payment terms, like grocery and quick-service retail chains.

What is the fastest way to shorten my cash conversion cycle?

For most small businesses, shortening Days Sales Outstanding (collecting faster) is the quickest lever because it is entirely within your control — invoice sooner, follow up the day a payment is past due rather than waiting a month, and consider an early-payment discount. Extending payment terms with suppliers also helps but depends on a supplier agreeing to it.

Written by the MidBank advocacy team MidBank has advocated for business owners since 2004 — 20+ years of experience and 1000+ clients served. We sit on the borrower's side of the table: we vet lenders and processors, read the contracts, and only promote services we believe in. Our story · Why we're different

Important: MidBank is not a bank, a financial institution, or a financial advisor. We are an advocate and ISO affiliate that connects businesses to vetted third-party providers. This article is general information published on November 20, 2026, not legal, tax, or financial advice — rules and rates change, and your situation is specific to you. Confirm details with the primary sources linked above and with a qualified tax or legal professional before acting.

Not sure which option fits your business?

That is the conversation we have every day. No cost, no obligation — we tell you what we would do if it were our money.

Schedule a ConsultationGet Started